Email health check
Check whether the mail for a domain is set up so that it arrives and cannot easily be faked, in one report with the fixes to make first.
Results for gmail.com
Email health: Good, with things to fix
Good, with 1 thing to fix.
Move DMARC past p=none. 2 parts not set up: recommendations, not faults.
- MXPass5 hosts, Google Workspace
- SPFPass1 of 10 lookups
- DKIMInfoNone found
- DMARCWarningp=none, sp=quarantine
- BlocklistsPass0 of 36 lists
- BIMIInfoNot set up
- MTA-STSPassEnforce
- TLS-RPTPass1 address
The level is the lowest category result, counted not weighted. Not set up counts as information, never as a fail. A part we couldn't check never counts as a pass.
Fix first
- Move DMARC past p=noneAt p=none nothing is blocked. It is the right place to start and the wrong place to stay. Read your reports, fix the senders that fail, then move to p=quarantine and p=reject.DMARC generator
MX5 hosts, Google Workspace
5 mail servers: Google Workspace
gmail-smtp-in.l.google.com, alt1.gmail-smtp-in.l.google.com, alt2.gmail-smtp-in.l.google.com, alt3.gmail-smtp-in.l.google.com, alt4.gmail-smtp-in.l.google.com
SPF1 of 10 lookups
Valid, ~all, 1 of 10 lookups
DKIMNone found
No key found among 24 common selectors. That doesn't prove there is none.
InfoNo key found among 24 common selectors. That doesn't prove there is none: a domain can use any selector name.
What to do: The s= value in a DKIM-Signature header of a real message names the selector.
DMARCp=none, sp=quarantine
p=none: reports only, nothing is blocked
Warningp=none: DMARC reports failures but does not act on them, so fake mail is delivered as normal.
What to do: Move to p=quarantine, then p=reject, as the reports come clean.
Blocklists0 of 36 lists
Not listed (36 checks across 3 mail server addresses)
BIMINot set up
Not set up (optional)
InfoNo BIMI record. BIMI shows your logo next to your mail in some inboxes. It is optional.
MTA-STSEnforce
Enforcing: senders must use TLS
TLS-RPT1 address
Reports go to 1 address
Can someone send mail as gmail.com?
Yes, and that is on purpose.
- No
- Partly
- Yes
Yes. Scale: No, receivers refuse fakes. Partly, fakes go to spam. Yes, fakes are likely delivered.
- Infogmail.com publishes p=none on purpose: millions of people send through other services as @gmail.com, so a stricter policy would block real mail.
- InfoSPF ~all: marks other servers as suspicious, but without an enforcing DMARC nothing is refused.
- Passsp=quarantine: subdomains are held to a stricter policy than gmail.com.
- ShareA link with the domain only.
- Copy summaryLevel, counts and the fixes, as plain text.
- Copy summary for an AIOne line with the fix ids.
Structured result (JSON) · 4.1 KB
{
"domain": "gmail.com",
"scope": "full",
"scannedAt": "2026-11-16T19:45:31.763Z",
"state": "ok",
"level": "good-with-fixes",
"counts": {
"pass": 5,
"info": 2,
"warn": 1,
"fail": 0,
"skipped": 0,
"unknown": 0,
"total": 8
},
"categories": [
{
"id": "mx",
"status": "pass",
"headline": "5 mail servers: Google Workspace",
"sub": "5 hosts, Google Workspace",
"tool": "dns-lookup"
},
{
"id": "spf",
"status": "pass",
"headline": "Valid, ~all, 1 of 10 lookups",
"sub": "1 of 10 lookups",
"tool": "spf-checker"
},
{
"id": "dkim",
"status": "info",
"headline": "No key found among 24 common selectors. That doesn't prove there is none.",
"sub": "None found",
"tool": "dkim-checker"
},
{
"id": "dmarc",
"status": "warn",
"headline": "p=none: reports only, nothing is blocked",
"sub": "p=none, sp=quarantine",
"tool": "dmarc-checker"
},
{
"id": "blocklists",
"status": "pass",
"headline": "Not listed (36 checks across 3 mail server addresses)",
"sub": "0 of 36 lists",
"tool": "blacklist-checker"
},
{
"id": "bimi",
"status": "info",
"headline": "Not set up (optional)",
"sub": "Not set up",
"tool": "bimi-check"
},
{
"id": "mta-sts",
"status": "pass",
"headline": "Enforcing: senders must use TLS",
"sub": "Enforce",
"tool": "mta-sts-check"
},
{
"id": "tls-rpt",
"status": "pass",
"headline": "Reports go to 1 address",
"sub": "1 address",
"tool": "tls-rpt-check"
}
],
"unfinished": [],
"notChecked": [
"dane",
"mail-tls"
],
"mailServers": [
"gmail-smtp-in.l.google.com",
"alt1.gmail-smtp-in.l.google.com",
"alt2.gmail-smtp-in.l.google.com",
"alt3.gmail-smtp-in.l.google.com",
"alt4.gmail-smtp-in.l.google.com"
],
"topFixes": [
{
"id": "dmarc-monitoring",
"category": "dmarc",
"severity": "warn",
"message": "Move DMARC past p=none",
"why": "At p=none nothing is blocked. It is the right place to start and the wrong place to stay.",
"fix": {
"tool": "dmarc-generator",
"text": "Read your reports, fix the senders that fail, then move to p=quarantine and p=reject."
}
}
],
"findings": [
{
"severity": "warn",
"category": "dmarc",
"message": "p=none: DMARC reports failures but does not act on them, so fake mail is delivered as normal.",
"fix": "Move to p=quarantine, then p=reject, as the reports come clean.",
"record": null
},
{
"severity": "info",
"category": "dkim",
"message": "No key found among 24 common selectors. That doesn't prove there is none: a domain can use any selector name.",
"fix": "The s= value in a DKIM-Signature header of a real message names the selector.",
"record": null
},
{
"severity": "info",
"category": "bimi",
"message": "No BIMI record. BIMI shows your logo next to your mail in some inboxes. It is optional.",
"fix": null,
"record": null
}
],
"provider": {
"name": "Google Workspace",
"advice": true
},
"policyDomain": null,
"spoofability": {
"verdict": "spoofable",
"reasons": [
{
"status": "info",
"text": "gmail.com publishes p=none on purpose: millions of people send through other services as @gmail.com, so a stricter policy would block real mail."
},
{
"status": "info",
"text": "SPF ~all: marks other servers as suspicious, but without an enforcing DMARC nothing is refused."
},
{
"status": "pass",
"text": "sp=quarantine: subdomains are held to a stricter policy than gmail.com."
}
],
"parked": false,
"mailboxProvider": true,
"subdomains": "Fake mail from a subdomain goes to spam (sp=quarantine).",
"hardening": []
},
"changesSinceLastScan": null,
"permalink": "/email-health-check?domain=gmail.com"
}More in Email · Reports
Next step
- Bulk sender rulesDo you meet the Gmail, Yahoo and Microsoft rules?Check gmail.com in Bulk sender rules
- Blacklist checkerIs a mail server listed?Check gmail.com in Blacklist checker
- DNS health checkAre the name servers behind these records healthy?Check gmail.com in DNS health check
What the report covers
Mail depends on a handful of records that live in different places and are easy to get slightly wrong. Each has its own checker, and people rarely have the time to open all of them. This report runs the lot for one domain and puts the answer on one page.
- Mail servers (MX): where mail for the domain is delivered, and which provider runs it when we can tell.
- SPF: which servers may send as the domain, and whether the record stays under the limit of 10 lookups.
- DKIM: the signing keys we can find among the common selectors, and whether any is shorter than 2048 bits or broken.
- DMARC: what receivers are told to do with mail that fails, and whether the policy is enforced or only watching.
- Blocklists: whether any mail server address of the domain is listed.
- BIMI, MTA-STS and TLS-RPT: the optional records. Not having them is a recommendation, never a fault.
Each part gets one line and a status: pass, info, warning, fail, or "Couldn't check" when it did not answer in time. Every status has a word next to its icon, so the page reads the same without colour.
A level word and counts, not a grade
The top of the report says one of four things: healthy, good with things to fix, needs attention, or not working. The level is the lowest result among the parts, and the counts beside it say how many passed, how many are information only, and how many are warnings or failures. Nothing is weighted and there is no letter, because a letter invites you to chase the letter instead of the problem.
A part that is not set up, such as BIMI, counts as information and never lowers the level. A part we could not check never counts as a pass. If a fifth or more of the parts did not finish, the report says it is based on the checks that did.
Fix first
Under the answer you get up to three fixes in the order that matters most: a missing DMARC record before a short DKIM key, a broken SPF record before an unlisted logo. Each row says why it matters and what to do, and where a copy-ready record helps, it has a Copy button.
When we recognise the mail provider from the MX records, the advice is written for it. A 1024-bit key at Microsoft 365 is fixed in the Defender portal, not in your DNS, and the row says so. When we do not recognise the provider, the advice stays general rather than guessing.
Can someone send mail as this domain?
The last card answers that in plain words, from the SPF and DMARC records: no, partly, or yes. A domain with no DMARC record, or one set to p=none, can be faked and the fake will usually be delivered. A domain that publishes p=reject and holds subdomains to the same rule cannot. The email spoofing check page gives only this answer and runs faster.
Mailbox providers such as gmail.com are a special case. They publish p=none on purpose, because millions of people send through other services as @gmail.com, and a stricter policy would block real mail. The card says "Yes, and that is on purpose" rather than calling it a mistake.
What we touch and what we keep
We read public DNS records and the public policy files for MTA-STS and BIMI. We never open a connection to a mail server and we never send a message. The report is built for the one request, a result that is a few minutes old may be shown again to save the servers asking twice, and nothing is kept about you.
The whole report can take up to 15 seconds, because it runs several checks and some of them query many blocklists. Without JavaScript the page waits and shows the finished report. With it, you see the parts finish one by one.
Questions people ask
Do you send an email to test?
No. We never send a message. We read your DNS records and, for MTA-STS and BIMI, the public policy files those records point to.
Why is there no grade?
A grade invites comparison between very different setups and hides what to do. A level word, counts and three fixes say what to change, and a domain that sends no mail can still be healthy.
Why does it say BIMI, MTA-STS and TLS-RPT are not set up when my mail works?
They are optional extras. Mail arrives without them. We list them as information because they add something: a logo in some inboxes, a rule that senders must use encryption, and reports when delivery fails.
What does "Couldn't check" mean?
That part did not answer within the time limit, so we cannot say if it passes. It is never counted as a pass or a fail. Run the matching checker on its own, or try the whole report again in a minute.
Why are DANE and mail server TLS missing?
They need a test that connects to your mail servers on port 25. We have not built that yet, so rather than guess, the report says they are not included and leaves them out of the level.
Does it check subdomains?
Yes, you can enter one. We check that exact name, and when its DMARC policy comes from the parent domain, the report says so. Mail for a subdomain that has no records of its own often relies on the parent.
Can I use the result in a ticket or a chat?
The Copy summary row gives a plain text version with the level, the counts and the fixes. The Copy summary for an AI row gives one line with the fix names, which suits a prompt.
Use it from AI, the API or the command line
Every LookupOwl tool is also a free API and an MCP tool, with no key and no account. This one is email_health. Please be kind to the rate limits.
curl "https://lookupowl.com/api/v1/tools/email-health?q=github.com"claude mcp add --transport http lookupowl https://lookupowl.com/mcp